KCB-55/KCB-33.3 gear pump Taibang

KCB-55 gear pump is mainly used for a variety of mechanical equipment lubrication oil transportation system for transporting viscosity at 10. E (75C.St) below the temperature at below 300 ℃ oil having lubricating properties . Stainless steel gear pump , can transport non-lubricating oil, beverage , low corrosive liquids. Equipped with low copper gear can transport the point liquids such as gasoline , benzene. in addition to the ordinary motor configuration , it can also be configured with the specifications of explosion-proof motors according to the user .

Use

KCB-55 gear pump , KCB-83.3, KCB-33.3 are suitable for conveying solid particles and fibers , non-corrosive, temperature no higher than 80 ℃, the viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt) of oil or other liquid lubricant of a similar nature .

Applications

KCB-55 gear pump can be used in the oil transfer system, booster pump ;

Used as a transport fuel systems , pressure , fuel injection pump ;

In all industrial areas, can be used as a lubricating oil pump .

Structural features

KCB-55 gear pump This series of main gears, shafts , pump, valve , shaft seal formed . KCB-55 gear oil pump gears after heat treatment have a higher hardness and strength , together with the operating shaft mounted in a replaceable bushings. The KCB-55 gear oil pump lubrication of all parts of the media are using the output automatically when the pump is working to achieve .

There are well-designed pump and back to the tank drain , gear to withstand the torque force at work a minimum , thus bearing loads of small, wear , high pump efficiency .